Address: 31125 Via Colinas, Suite 905 Westlake Village, CA 91362 | Phone: 800-888-4005
Address: 31125 Via Colinas, Suite 905 Westlake Village, CA 91362 | Phone: 800-888-4005
Discontinued
Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press With 3/4” Motor Amps: 12.5 Cord Type: 9′ Fixed Tool Warranty: 5 Years Voltage: 120V AC Weight: 70.0 lbs Power Source: Corded
Discontinued
Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press With 3/4” Motor No job is too large for the Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press With 3/4” Motor. The Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press With 3/4” Motor features the 4203 adjustable-position, variable-speed base and the 4262-1 3/4-in drill motor with 3-Jaw chuck. Built for production drilling, this 11.5-amp drill press can handle the toughest drilling jobs with up to a 3/4” Twist Drill hole capacity, 4” hole capacity with Steel Hawg® Cutters and 1”-14 tapping capacity.
The motor runs at 350 no-load RPM, geared low for maximum torque; base control panel offers variable speed control of motor RPM. The Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press With 3/4” Motor can produce up to 1670 pounds of drill point pressure with a 1-inch steel plate. Feedback speed control helps you maintain speed during operation. This unit features a 3/4” chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling.
Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press With 3/4” Motor Includes
| Part Number | 4206-1 |
|---|---|
| AMPS | 12.5 |
| Cord Type | 9' Fixed |
| Tool Warranty | 5 Years |
| Voltage | 120V AC |
| Weight | 70.0 lbs |
| Power Source | Corded |
| No LoadRPM | 0-350 |
| Construction Type | Grounded |
| Electronic Feedback | Yes |
| Adjustable Base | Yes |
| Drill Travel | 11'' |
| Chuck or Taper | Chuck |
| Drill Capacity | 3/4'' |
| Drill Point Pressure | 1, 630/1, 670 lbs |
| Tap Capacity | 1''-14 |
| UPC | 045242012824 |
The motor runs at 350 no-load RPM, geared low for maximum torque; base control panel offers variable speed control of motor RPM. The Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press With 3/4” Motor can produce up to 1670 pounds of drill point pressure with a 1-inch steel plate. Feedback speed control helps you maintain speed during operation. This unit features a 3/4” chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling.
Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press With 3/4” Motor Includes
| Part Number | 4206-1 |
|---|---|
| AMPS | 12.5 |
| Cord Type | 9' Fixed |
| Tool Warranty | 5 Years |
| Voltage | 120V AC |
| Weight | 70.0 lbs |
| Power Source | Corded |
| No LoadRPM | 0-350 |
| Construction Type | Grounded |
| Electronic Feedback | Yes |
| Adjustable Base | Yes |
| Drill Travel | 11'' |
| Chuck or Taper | Chuck |
| Drill Capacity | 3/4'' |
| Drill Point Pressure | 1, 630/1, 670 lbs |
| Tap Capacity | 1''-14 |
| UPC | 045242012824 |
Discontinued
Discontinued
Discontinued
Discontinued
Discontinued
Discontinued
Discontinued
Discontinued
Discontinued
