Address: 31125 Via Colinas, Suite 905 Westlake Village, CA 91362 | Phone: 800-888-4005
Address: 31125 Via Colinas, Suite 905 Westlake Village, CA 91362 | Phone: 800-888-4005
8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke. Product Type: Pneumatic Self-Feed Twin Drill Free Speed: 5,000RPM Gear Reduction: Single Stroke Length: 1-1/4” / 32mm
Product image may not represent exact model.
>
The 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke is a high-efficiency dual-spindle production tool engineered to perform two machining operations per cycle with exceptional accuracy. Designed for hole center distances from 3/8” to 3-3/4”, the 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke is an ideal solution for close-center drilling challenges where speed, repeatability, and part quality are essential. By executing two operations simultaneously, this Par-A-Matic Twin Air Drill significantly reduces machining time and parts handling while maintaining the precision required in demanding aerospace and industrial environments.
Like all Par-A-Matic automatic production tools, the 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke is fully self-contained, using compressed air for both spindle rotation and feed/control functions. Its compact rotary-vane motors deliver an excellent power-to-size ratio that minimizes tool weight and gives integrators greater design flexibility.
The 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke incorporates a built-in four-way valve for both manual and remote actuation, making it adaptable to a wide variety of production workflows. Adjustable dual spindles enable easy reconfiguration as machining requirements evolve, while a double-acting air piston ensures smooth, controlled forward and retract strokes. Needle valve controls allow fine-tuning of motion characteristics, and an integrated adjustment screw provides infinite stroke-length settings up to the full rated capability. Ball bearing spindle support delivers long service life and consistent precision under continuous production demands. A muffled exhaust system further enhances operator comfort by reducing overall noise levels.
Engineered to streamline throughput while improving accuracy and part uniformity, the 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke is an excellent choice for manufacturers seeking a flexible, reliable, and high-performance dual-spindle drilling solution for automated machining environments.
| Part Number | 8258-C50-1 |
|---|---|
| Product Type | Pneumatic Self-Feed Twin Drill |
| Free Speed | 000rpm, 5 |
| Gear Reduction | Single |
| Stroke Length | 1-1/4'' / 32mm |
| Nom Drill Cap Stl SAE 1213 | 1/16'' / 1.6mm |
| Nom Drill Cap Alum. 2024-T4 | 1/8'' / 3.2mm |
| Nom Drill Cap Wood, Med, FRP | 1/8'' / 3.2mm |
| Spindle Adjustment | 1/2'' to 2-1/2'' centers (12.7 to 63.5mm) |
| Air Inlet | 1/4'' NPT male |
| Control Ports | 1/8'' NPTF female |
| Recommended Hose Size | 5/16'' ID |
| Rec. Operating Pressure | 90 PSI / 6.2 bar |
Product image may not represent exact model.
>The 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke is a high-efficiency dual-spindle production tool engineered to perform two machining operations per cycle with exceptional accuracy. Designed for hole center distances from 3/8” to 3-3/4”, the 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke is an ideal solution for close-center drilling challenges where speed, repeatability, and part quality are essential. By executing two operations simultaneously, this Par-A-Matic Twin Air Drill significantly reduces machining time and parts handling while maintaining the precision required in demanding aerospace and industrial environments.
Like all Par-A-Matic automatic production tools, the 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke is fully self-contained, using compressed air for both spindle rotation and feed/control functions. Its compact rotary-vane motors deliver an excellent power-to-size ratio that minimizes tool weight and gives integrators greater design flexibility.
The 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke incorporates a built-in four-way valve for both manual and remote actuation, making it adaptable to a wide variety of production workflows. Adjustable dual spindles enable easy reconfiguration as machining requirements evolve, while a double-acting air piston ensures smooth, controlled forward and retract strokes. Needle valve controls allow fine-tuning of motion characteristics, and an integrated adjustment screw provides infinite stroke-length settings up to the full rated capability. Ball bearing spindle support delivers long service life and consistent precision under continuous production demands. A muffled exhaust system further enhances operator comfort by reducing overall noise levels.
Engineered to streamline throughput while improving accuracy and part uniformity, the 8258-C50-1 Ingersoll Rand Par-A-Matic Valve-In-Head Self-Feed Twin Air Drill, 1-1/4” Stroke is an excellent choice for manufacturers seeking a flexible, reliable, and high-performance dual-spindle drilling solution for automated machining environments.
| Part Number | 8258-C50-1 |
|---|---|
| Product Type | Pneumatic Self-Feed Twin Drill |
| Free Speed | 000rpm, 5 |
| Gear Reduction | Single |
| Stroke Length | 1-1/4'' / 32mm |
| Nom Drill Cap Stl SAE 1213 | 1/16'' / 1.6mm |
| Nom Drill Cap Alum. 2024-T4 | 1/8'' / 3.2mm |
| Nom Drill Cap Wood, Med, FRP | 1/8'' / 3.2mm |
| Spindle Adjustment | 1/2'' to 2-1/2'' centers (12.7 to 63.5mm) |
| Air Inlet | 1/4'' NPT male |
| Control Ports | 1/8'' NPTF female |
| Recommended Hose Size | 5/16'' ID |
| Rec. Operating Pressure | 90 PSI / 6.2 bar |
