Address: 31125 Via Colinas, Suite 905 Westlake Village, CA 91362 | Phone: 800-888-4005
Address: 31125 Via Colinas, Suite 905 Westlake Village, CA 91362 | Phone: 800-888-4005
2025MAX Ingersoll Rand Low Profile Right Angle Air Impact Wrench, 1/2” Square Drive. Actuation/Throttle Type/Switch Type: Feather-Touch Trigger Air Consumption @ Load (cfm): 19 cfm Air Consumption @ Load (l/min): 538 l/min Air Inlet: 1/4” NPT
The 2025MAX Ingersoll Rand Low Profile Right Angle Air Impact Wrench, 1/2” Square Drive is lightweight, durable, and easy to use. Paired with its powerful vane motor and trigger actuation, this tool will quickly become your favorite on any job site.
With a finely tuned vane motor and power regulation, youll have full control of your tool while never having to settle for less power. Thanks to this wrenchs angle grip and composite housing, youll be able to access any hard-to-reach spaces with ease. The 2025MAX Ingersoll Rand Low Profile Right Angle Air Impact Wrench, 1/2” Square Drive features a square socket retaining ring anvil, allowing it switch sockets with ease. Perfect for automotive repair work. Feather touch trigger, 2-position forward power regulator, forward/reverse ring. Compact design, with head height under 2 inches, makes operation and access easier in tight spots so you can perform even the most detailed work with this air impact wrench. Ergonomically sound rear exhaust system. Offers the same reach as a ratchet. 180 ft-lb max torque. Free speed: 7,100 revolutions per minute. Optimized for the vehicle repair industry, body shops, and MRO, as well as general industrial and facility maintenance.
The 2025MAX Ingersoll Rand Low Profile Right Angle Air Impact Wrench, 1/2” Square Drive is backed by a 1-year warranty for peace of mind.
| Part Number | 2025MAX |
|---|---|
| Actuation/Throttle/Switch | Feather-Touch Trigger |
| Air Consumption @ Load (cfm) | 19 cfm |
| Air Cons. @ Load (l/min) | 538 l/min |
| Air Inlet | 1/4'' NPT |
| Air Pressure (psi) | 90 PSI |
| Anvil Length | Standard |
| Average Air Cons. (cfm) | 3.5 cfm |
| Average Air Cons. (l/min) | 99 l/min |
| Blows per Min | 2100 BPM |
| Color | Grey |
| Configuration/Handle Type | Right Angle |
| Drive Size | 1/2'' |
| Drive Type | Square |
| Duty Rating | Maintenance Duty |
| End Plates | Aluminum with Hard-coating |
| Exhaust Location | Bottom |
| Free Spd Sound Press./Pwr | 94.1 / 105.1 |
| Hammer Case | Aluminum |
| Handle Material | Composite |
| Impact Mechanism | Single Hammer |
| Impact Sound Prs/Pwr Db(A) | 96.6 / 107.6 |
| Max Bolt Diameter | 7/16'' |
| Max Free Speed (rpm) | 9000RPM |
| Max Pressure | 6.2 bar |
| Max Torque | 180 ft-lbs / 2160 in-lbs / 244 Nm |
| Min. Hose Size | 3/8'' |
| Motor | Reverse Bias |
| Number of Power Settings | 2 |
| Power Source | Air Powered |
| Nut-busting Torque/Weight | 52.9 ft-lbs/lbs |
| Product Height | 3.1'' / 79mm |
| Product Length | 13.1'' / 333mm |
| Product Weight | 3.4lbs / 1.54kg |
| Product Width | 2.2'' / 56mm |
| Rec. Forward Torque Range | 45-140 ft-lbs / 540-1682 in-lbs / 61-190 Nm |
| Recommended Reverse Torque | 45-160 ft-lbs / 61-217 Nm |
| Retainer Type | Friction Ring |
| Side to Center Distance (in) | 1.1'' / 28mm |
| Standards/Certifications | Cagi B186, Iso 11148-6, Iso 15744, Iso 28927-2 |
| Tool Type | Full-size |
| UPC | 663023088662 |
| Vanes | 7 |
| Vibration Level (M/S2) | 17.4m/s2 |
| Warranty | 1-year |
The 2025MAX Ingersoll Rand Low Profile Right Angle Air Impact Wrench, 1/2” Square Drive is lightweight, durable, and easy to use. Paired with its powerful vane motor and trigger actuation, this tool will quickly become your favorite on any job site.
With a finely tuned vane motor and power regulation, youll have full control of your tool while never having to settle for less power. Thanks to this wrenchs angle grip and composite housing, youll be able to access any hard-to-reach spaces with ease. The 2025MAX Ingersoll Rand Low Profile Right Angle Air Impact Wrench, 1/2” Square Drive features a square socket retaining ring anvil, allowing it switch sockets with ease. Perfect for automotive repair work. Feather touch trigger, 2-position forward power regulator, forward/reverse ring. Compact design, with head height under 2 inches, makes operation and access easier in tight spots so you can perform even the most detailed work with this air impact wrench. Ergonomically sound rear exhaust system. Offers the same reach as a ratchet. 180 ft-lb max torque. Free speed: 7,100 revolutions per minute. Optimized for the vehicle repair industry, body shops, and MRO, as well as general industrial and facility maintenance.
The 2025MAX Ingersoll Rand Low Profile Right Angle Air Impact Wrench, 1/2” Square Drive is backed by a 1-year warranty for peace of mind.
| Part Number | 2025MAX |
|---|---|
| Actuation/Throttle/Switch | Feather-Touch Trigger |
| Air Consumption @ Load (cfm) | 19 cfm |
| Air Cons. @ Load (l/min) | 538 l/min |
| Air Inlet | 1/4'' NPT |
| Air Pressure (psi) | 90 PSI |
| Anvil Length | Standard |
| Average Air Cons. (cfm) | 3.5 cfm |
| Average Air Cons. (l/min) | 99 l/min |
| Blows per Min | 2100 BPM |
| Color | Grey |
| Configuration/Handle Type | Right Angle |
| Drive Size | 1/2'' |
| Drive Type | Square |
| Duty Rating | Maintenance Duty |
| End Plates | Aluminum with Hard-coating |
| Exhaust Location | Bottom |
| Free Spd Sound Press./Pwr | 94.1 / 105.1 |
| Hammer Case | Aluminum |
| Handle Material | Composite |
| Impact Mechanism | Single Hammer |
| Impact Sound Prs/Pwr Db(A) | 96.6 / 107.6 |
| Max Bolt Diameter | 7/16'' |
| Max Free Speed (rpm) | 9000RPM |
| Max Pressure | 6.2 bar |
| Max Torque | 180 ft-lbs / 2160 in-lbs / 244 Nm |
| Min. Hose Size | 3/8'' |
| Motor | Reverse Bias |
| Number of Power Settings | 2 |
| Power Source | Air Powered |
| Nut-busting Torque/Weight | 52.9 ft-lbs/lbs |
| Product Height | 3.1'' / 79mm |
| Product Length | 13.1'' / 333mm |
| Product Weight | 3.4lbs / 1.54kg |
| Product Width | 2.2'' / 56mm |
| Rec. Forward Torque Range | 45-140 ft-lbs / 540-1682 in-lbs / 61-190 Nm |
| Recommended Reverse Torque | 45-160 ft-lbs / 61-217 Nm |
| Retainer Type | Friction Ring |
| Side to Center Distance (in) | 1.1'' / 28mm |
| Standards/Certifications | Cagi B186, Iso 11148-6, Iso 15744, Iso 28927-2 |
| Tool Type | Full-size |
| UPC | 663023088662 |
| Vanes | 7 |
| Vibration Level (M/S2) | 17.4m/s2 |
| Warranty | 1-year |
